View DF52-2832PCF_8969150.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 2016.5 features 1. small-sized connector 0.8mm pitch, 1.75mm height, 4.1mm depth. suitable for small-sized applications. 2. small but robust structure the housing is designed with thick walls while remaining small. this produces a strong, robust connector that resists damage. 3. suitable for high current applications. the maximum current of 2.5a (using 2-pos 28 awg wire) is achieved by using highly conductive material and appropriate contact force. 4. box shaped contact prevents deformation. the box shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. visual check insures fully mated plug and receptacle the housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. glow wire compliance (compliant with iec 60695-2-11) 7. halogen-free chlorine and bromine levels are below standard values of iec 61249-2-21. br : less than 900ppm, cl : less than 900ppm, br + cl : less than 1,500ppm. box shaped contact structure allows for visual inspection of the mating process. housing walls are thick while the connector remains small. robust structure prevents da mage while routing wiring. the box shaped structure of the crimp contact prevents deformation. the mated condition can be visually checked. board side incomplete mating cable side mating complete thick wall parts thick wall parts the contact is exposed in the half-mated state. mating is complete when the contact is no longer visible. exposed contact 0.8mm pitch, compact and robu st wire-to-board connectors df52 series small and robust structure fig.1 fig.2 fig.3 product specifications ratings current rating no. of contacts 2 3 to 5 6 to 10 12 or more operating temperature range : -40 to 85 ? (note 1) operating humidity range : 20 to 80 % (note 2) 28 awg 2.5a 2.0a 1.5a 1.2a 30 awg 2.0a 1.5a 1.2a 1.0a 32 awg 1.5a 1.0a 0.8a 0.8a voltage rating ac ? dc 100 + storage temperature range : -10 to 60 ? c (note 3) storage humidity range : 40 to 70% (note 3) items specifications conditions 1.insulation resistance 100m
min. measured at 100v dc 2. withstanding voltage no flashover dielectric breakdown 300v ac applied for 1 minute. 3.contact resistance 10 <
max. measured at a maximum of 20 v dc, 1ma (dc or 1000hz) 4. vibration resistance no electrical discontinuity for more than 1 s 10 cycles in each of three axis at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1 s acceleration of 490 m/s 2 ,11 ms, 3 directions (semi- sinusoidal), 3 cycles each 6. moisture resistance contact resistance : 20m
max. insulation resistance : 100m
min. temperature : 402 ? ; humidity : 90 to 95%, for 96 hours 7. temperature cycle contact resistance : 20m
max. insulation resistance : 100m
min. (-55 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes 85 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes) in 5 cycles 8. mating durability contact resistance : 20m
max. mating and unmating : 20 times 9. solder heat resistance no dissolution of housing parts that affect performance. reflow : according to the recommended temperature profile manual soldering : temperature of soldering iron at 350 ? 10 ? for 3 seconds note 1 : includes the temperature rise caused by current flow. note 2 : use in environments without condensation. note 3 : the term ?torage?refers to the long-term storage condition of unused products before pcb mounting. operating temperature/humidity range is applied to the deenergized state after mounting of pcb and the temporary storage state during transportation. materials / finish product part materials finish ul regulation receptacle insulator polyamide black ul94v-0 contact copper alloy tin plating crimping plug insulator polyamide black ul94v-0 crimp contact contact copper alloy tin plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. receptacle df 52 - * s - 0.8 h ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type s : receptacle b contact pitch : 0.8mm c termination style : smt right angle type crimp contact df 52 - 2832 pcf ^ _ ` a ^ series name %' _ series no. ` applicable wire size up"8( a method type/packaging type 1$' 1mvhdsjnqdpoubdu sffm plug connector df 52 - * p - 0.8 c ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type p : crimping plug b contact pitch : 0.8mm c termination style $ : crimping plug 2 df52 series 0.8mm pitch, compact and robust wire-to-board connectors unreeling direction unreeling direction 80.1 40.1 20.1 b0.1 1.750.1 c +0.2 0 (a) b0.1 1.750.1 (a) (0.3) (2.25) (0.3) (2.25) ?1.5 +0.1 0 80.1 40.1 20.1 ?1.5 +0.1 0 upqpt 4uzmfpgsffm qpt b recommended pcb layout b packaging speci cation a contact no.1 mark b c p=0.8 2.77 1.75 t=0.2 t=0.15 0.50.03 0.90.05 0.80.05 b0.05 3.220.05 10.05 1.60.05 (0.3) p=0.80.05 6ojunn part no. hrs no. no. of contacts abc df52-2s-0.8h(21) 668-0004-5 21 2 3.8 0.8 3.2 df52-3s-0.8h(21) 668-0022-7 21 3 4.6 1.6 4.0 df52-4s-0.8h(21) 668-0005-8 21 4 5.4 2.4 4.8 df52-5s-0.8h(21) 668-0023-0 21 5 6.2 3.2 5.6 df52-6s-0.8h(21) 668-0006-0 21 6 7.0 4.0 6.4 df52-8s-0.8h(21) 668-0007-3 21 8 8.6 5.6 8.0 df52-10s-0.8h(21) 668-0008-6 21 10 10.2 7.2 9.6 df52-12s-0.8h(21) 668-0009-9 21 12 11.8 8.8 11.2 df52-14s-0.8h(21) 668-0024-2 21 14 13.4 10.4 12.8 df52-15s-0.8h(21) 668-0010-8 21 15 14.2 11.2 13.6 df52-16s-0.8h(21) 668-0025-5 21 16 15.0 12.0 14.4 df52-17s-0.8h(21) 668-0001-7 21 17 15.8 12.8 15.2 df52-20s-0.8h(21) 668-0011-0 21 20 18.2 15.2 17.6 note : please place orders for embossed packaged products in multiples 5,000 (5,000 pcs/reel). unreeling direction ?210.8 20.5 ?130.2 ?1.5 to the depth of the perforation product label %."9 & ?3802 ?801 r1 6ojunn part no. no. of contacts abcde df52-2s-0.8h(21) 2 16.0 7.5 22.4 16.4 df52-3s-0.8h(21) 3 df52-4s-0.8h(21) 4 df52-5s-0.8h(21) 5 df52-6s-0.8h(21) 6 df52-8s-0.8h(21) 8 24.0 11.5 30.4 24.4 df52-10s-0.8h(21) 10 df52-12s-0.8h(21) 12 df52-14s-0.8h(21) 14 df52-15s-0.8h(21) 15 df52-16s-0.8h(21) 16 df52-17s-0.8h(21) 17 df52-20s-0.8h(21) 20 32.0 14.2 28.4 38.4 32.4 3 df52 series 0.8mm pitch, compact and robust wire-to-board connectors [specification number] (21) : tin plating, embossed packaging right angle receptacle 4 df52 series 0.8mm pitch, compact and robust wire-to-board connectors crimping plug crimp contact contact no.1 mark one mark for every 5 pins 3.2 a 1 1.65 b p=0.8 1.4 2.68 1.35 0.65 0.3 3 3.8 (6.18) 0.6 0.66 p=4 t=0.12 6ojunn part no. hrs no. no. of contacts ab df52-2p-0.8c 668-0013-6 00 2 0.8 3.5 df52-3p-0.8c 668-0026-8 00 3 1.6 4.3 df52-4p-0.8c 668-0014-9 00 4 2.4 5.1 df52-5p-0.8c 668-0027-0 00 5 3.2 5.9 df52-6p-0.8c 668-0015-1 00 6 4.0 6.7 df52-8p-0.8c 668-0016-4 00 8 5.6 8.3 df52-10p-0.8c 668-0017-7 00 10 7.2 9.9 df52-12p-0.8c 668-0018-0 00 12 8.8 11.5 df52-14p-0.8c 668-0028-3 00 14 10.4 13.1 df52-15p-0.8c 668-0019-2 00 15 11.2 13.9 df52-16p-0.8c 668-0029-6 00 16 12.0 14.7 df52-17p-0.8c 668-0002-0 00 17 12.8 15.5 df52-20p-0.8c 668-0020-1 00 20 15.2 17.9 note : please specify the number of packs (100 pcs/pack) when placing orders. part no. hrs no. type quantity finish DF52-2832PCF 668-0030-5 00 reel contact 40,000 pcs/reel tin plating note 1 : this product is sold in 40,000 piecies per reels. please place orders in multiples of 40,000. ?"qqmjdbcmfxjsf 5joofe"oofbmfe$pqqfs8jsf
conductor size (core structure) jacket outer diameter recommended wire strip length 28 awg (7 pieces/0.127mm in diameter) 0.5 to 0.6mm ul1571 (thin line) 0.9 to 1.3mm 30 awg (7 pieces/0.102mm in diameter) 32 awg (7 pieces/0.08mm in diameter) note : please contact our sales representative. when using wires other than applicable wires. note : the strip length is a reference value. please adjust the strip length accordingly for specifications and requirements. refer to the crimping quality standard (atad-h0789) for details. [specification number] none : 40,000 pcs/reel [specification number] none : 100 pcs/pack 5 df52 series 0.8mm pitch, compact and robust wire-to-board connectors b applicable crimping tools type part no. hrs no. applicable contact remarks applicator ap105-df52-2832p 901-4636-7 DF52-2832PCF dhs877900h-up DF52-2832PCF (note 2) manufactured by japan automatic machine co.,ltd. press body cm-105c 901-0001-0 00 pull-out tool df-c-po(a) 550-0170-8 00 DF52-2832PCF note 1 : issues caused by using other than our specified tools are not covered by warranty. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding defective crimping of adapting applicators manufactured by j.a.m. url http://www.jam-net.co.jp b precautions 1. recommended temperature profile (compatible with lead- free soldering) [applicable conditions] 1. peak temperature : 250 ? max. 2. heating area : 220 ? min. for less than 60 seconds 3. preheating area : 150 ? to 180 ? for 90 to 120 seconds 4. number of times : no more than 2 times * measurement is conducted at the contact lead part soldering results may change depending on conditions such as solder paste type, manufacturer, pcb size, and other soldering materials. please determine all mounting conditions before use. note 1 : this temperature profile is a recommended value. 2. recommended manual soldering conditions temperature of soldering iron : 350 ? 10 ? , soldering time : within 3 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness : 0.1mm, aperture opening ratio : 100% 4. warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended due to potential changes in mating action and other variab les. please contact us if yo u use other cleaning agents. ) 6. noteworthy points please note that any mating operation of the connector when not mounted on the board may cause damage or deformation of the contacts. during hand soldering, do not apply flux, as it will flow over the connector. this housing color may have slight variations depending on the production lot. this color variation does not affect performance. please refer to l df52 mating and unmating procedure document (etad-h0788) z for points in handling regarding mating operations. please refer to l harness procedure manual (etad-h0791) z for points in harness operations. 10sec max 90-120sec time (sec) temperature ? yy max 250 ? 60sec max ? ? pre-heating time soldering time 6 df52 series 0.8mm pitch, compact and robust wire-to-board connectors the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 2016.5 features 1. small-sized connector 0.8mm pitch, 1.75mm height, 4.1mm depth. suitable for small-sized applications. 2. small but robust structure the housing is designed with thick walls while remaining small. this produces a strong, robust connector that resists damage. 3. suitable for high current applications. the maximum current of 2.5a (using 2-pos 28 awg wire) is achieved by using highly conductive material and appropriate contact force. 4. box shaped contact prevents deformation. the box shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. visual check insures fully mated plug and receptacle the housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. glow wire compliance (compliant with iec 60695-2-11) 7. halogen-free chlorine and bromine levels are below standard values of iec 61249-2-21. br : less than 900ppm, cl : less than 900ppm, br + cl : less than 1,500ppm. box shaped contact structure allows for visual inspection of the mating process. housing walls are thick while the connector remains small. robust structure prevents da mage while routing wiring. the box shaped structure of the crimp contact prevents deformation. the mated condition can be visually checked. board side incomplete mating cable side mating complete thick wall parts thick wall parts the contact is exposed in the half-mated state. mating is complete when the contact is no longer visible. exposed contact 0.8mm pitch, compact and robu st wire-to-board connectors df52 series small and robust structure fig.1 fig.2 fig.3 product specifications ratings current rating no. of contacts 2 3 to 5 6 to 10 12 or more operating temperature range : -40 to 85 ? (note 1) operating humidity range : 20 to 80 % (note 2) 28 awg 2.5a 2.0a 1.5a 1.2a 30 awg 2.0a 1.5a 1.2a 1.0a 32 awg 1.5a 1.0a 0.8a 0.8a voltage rating ac ? dc 100 + storage temperature range : -10 to 60 ? c (note 3) storage humidity range : 40 to 70% (note 3) items specifications conditions 1.insulation resistance 100m
min. measured at 100v dc 2. withstanding voltage no flashover dielectric breakdown 300v ac applied for 1 minute. 3.contact resistance 10 <
max. measured at a maximum of 20 v dc, 1ma (dc or 1000hz) 4. vibration resistance no electrical discontinuity for more than 1 s 10 cycles in each of three axis at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1 s acceleration of 490 m/s 2 ,11 ms, 3 directions (semi- sinusoidal), 3 cycles each 6. moisture resistance contact resistance : 20m
max. insulation resistance : 100m
min. temperature : 402 ? ; humidity : 90 to 95%, for 96 hours 7. temperature cycle contact resistance : 20m
max. insulation resistance : 100m
min. (-55 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes 85 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes) in 5 cycles 8. mating durability contact resistance : 20m
max. mating and unmating : 20 times 9. solder heat resistance no dissolution of housing parts that affect performance. reflow : according to the recommended temperature profile manual soldering : temperature of soldering iron at 350 ? 10 ? for 3 seconds note 1 : includes the temperature rise caused by current flow. note 2 : use in environments without condensation. note 3 : the term ?torage?refers to the long-term storage condition of unused products before pcb mounting. operating temperature/humidity range is applied to the deenergized state after mounting of pcb and the temporary storage state during transportation. materials / finish product part materials finish ul regulation receptacle insulator polyamide black ul94v-0 contact copper alloy tin plating crimping plug insulator polyamide black ul94v-0 crimp contact contact copper alloy tin plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. receptacle df 52 - * s - 0.8 h ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type s : receptacle b contact pitch : 0.8mm c termination style : smt right angle type crimp contact df 52 - 2832 pcf ^ _ ` a ^ series name %' _ series no. ` applicable wire size up"8( a method type/packaging type 1$' 1mvhdsjnqdpoubdu sffm plug connector df 52 - * p - 0.8 c ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type p : crimping plug b contact pitch : 0.8mm c termination style $ : crimping plug 2 df52 series 0.8mm pitch, compact and robust wire-to-board connectors unreeling direction unreeling direction 80.1 40.1 20.1 b0.1 1.750.1 c +0.2 0 (a) b0.1 1.750.1 (a) (0.3) (2.25) (0.3) (2.25) ?1.5 +0.1 0 80.1 40.1 20.1 ?1.5 +0.1 0 upqpt 4uzmfpgsffm qpt b recommended pcb layout b packaging speci cation a contact no.1 mark b c p=0.8 2.77 1.75 t=0.2 t=0.15 0.50.03 0.90.05 0.80.05 b0.05 3.220.05 10.05 1.60.05 (0.3) p=0.80.05 6ojunn part no. hrs no. no. of contacts abc df52-2s-0.8h(21) 668-0004-5 21 2 3.8 0.8 3.2 df52-3s-0.8h(21) 668-0022-7 21 3 4.6 1.6 4.0 df52-4s-0.8h(21) 668-0005-8 21 4 5.4 2.4 4.8 df52-5s-0.8h(21) 668-0023-0 21 5 6.2 3.2 5.6 df52-6s-0.8h(21) 668-0006-0 21 6 7.0 4.0 6.4 df52-8s-0.8h(21) 668-0007-3 21 8 8.6 5.6 8.0 df52-10s-0.8h(21) 668-0008-6 21 10 10.2 7.2 9.6 df52-12s-0.8h(21) 668-0009-9 21 12 11.8 8.8 11.2 df52-14s-0.8h(21) 668-0024-2 21 14 13.4 10.4 12.8 df52-15s-0.8h(21) 668-0010-8 21 15 14.2 11.2 13.6 df52-16s-0.8h(21) 668-0025-5 21 16 15.0 12.0 14.4 df52-17s-0.8h(21) 668-0001-7 21 17 15.8 12.8 15.2 df52-20s-0.8h(21) 668-0011-0 21 20 18.2 15.2 17.6 note : please place orders for embossed packaged products in multiples 5,000 (5,000 pcs/reel). unreeling direction ?210.8 20.5 ?130.2 ?1.5 to the depth of the perforation product label %."9 & ?3802 ?801 r1 6ojunn part no. no. of contacts abcde df52-2s-0.8h(21) 2 16.0 7.5 22.4 16.4 df52-3s-0.8h(21) 3 df52-4s-0.8h(21) 4 df52-5s-0.8h(21) 5 df52-6s-0.8h(21) 6 df52-8s-0.8h(21) 8 24.0 11.5 30.4 24.4 df52-10s-0.8h(21) 10 df52-12s-0.8h(21) 12 df52-14s-0.8h(21) 14 df52-15s-0.8h(21) 15 df52-16s-0.8h(21) 16 df52-17s-0.8h(21) 17 df52-20s-0.8h(21) 20 32.0 14.2 28.4 38.4 32.4 3 df52 series 0.8mm pitch, compact and robust wire-to-board connectors [specification number] (21) : tin plating, embossed packaging right angle receptacle 4 df52 series 0.8mm pitch, compact and robust wire-to-board connectors crimping plug crimp contact contact no.1 mark one mark for every 5 pins 3.2 a 1 1.65 b p=0.8 1.4 2.68 1.35 0.65 0.3 3 3.8 (6.18) 0.6 0.66 p=4 t=0.12 6ojunn part no. hrs no. no. of contacts ab df52-2p-0.8c 668-0013-6 00 2 0.8 3.5 df52-3p-0.8c 668-0026-8 00 3 1.6 4.3 df52-4p-0.8c 668-0014-9 00 4 2.4 5.1 df52-5p-0.8c 668-0027-0 00 5 3.2 5.9 df52-6p-0.8c 668-0015-1 00 6 4.0 6.7 df52-8p-0.8c 668-0016-4 00 8 5.6 8.3 df52-10p-0.8c 668-0017-7 00 10 7.2 9.9 df52-12p-0.8c 668-0018-0 00 12 8.8 11.5 df52-14p-0.8c 668-0028-3 00 14 10.4 13.1 df52-15p-0.8c 668-0019-2 00 15 11.2 13.9 df52-16p-0.8c 668-0029-6 00 16 12.0 14.7 df52-17p-0.8c 668-0002-0 00 17 12.8 15.5 df52-20p-0.8c 668-0020-1 00 20 15.2 17.9 note : please specify the number of packs (100 pcs/pack) when placing orders. part no. hrs no. type quantity finish DF52-2832PCF 668-0030-5 00 reel contact 40,000 pcs/reel tin plating note 1 : this product is sold in 40,000 piecies per reels. please place orders in multiples of 40,000. ?"qqmjdbcmfxjsf 5joofe"oofbmfe$pqqfs8jsf
conductor size (core structure) jacket outer diameter recommended wire strip length 28 awg (7 pieces/0.127mm in diameter) 0.5 to 0.6mm ul1571 (thin line) 0.9 to 1.3mm 30 awg (7 pieces/0.102mm in diameter) 32 awg (7 pieces/0.08mm in diameter) note : please contact our sales representative. when using wires other than applicable wires. note : the strip length is a reference value. please adjust the strip length accordingly for specifications and requirements. refer to the crimping quality standard (atad-h0789) for details. [specification number] none : 40,000 pcs/reel [specification number] none : 100 pcs/pack 5 df52 series 0.8mm pitch, compact and robust wire-to-board connectors b applicable crimping tools type part no. hrs no. applicable contact remarks applicator ap105-df52-2832p 901-4636-7 DF52-2832PCF dhs877900h-up DF52-2832PCF (note 2) manufactured by japan automatic machine co.,ltd. press body cm-105c 901-0001-0 00 pull-out tool df-c-po(a) 550-0170-8 00 DF52-2832PCF note 1 : issues caused by using other than our specified tools are not covered by warranty. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding defective crimping of adapting applicators manufactured by j.a.m. url http://www.jam-net.co.jp b precautions 1. recommended temperature profile (compatible with lead- free soldering) [applicable conditions] 1. peak temperature : 250 ? max. 2. heating area : 220 ? min. for less than 60 seconds 3. preheating area : 150 ? to 180 ? for 90 to 120 seconds 4. number of times : no more than 2 times * measurement is conducted at the contact lead part soldering results may change depending on conditions such as solder paste type, manufacturer, pcb size, and other soldering materials. please determine all mounting conditions before use. note 1 : this temperature profile is a recommended value. 2. recommended manual soldering conditions temperature of soldering iron : 350 ? 10 ? , soldering time : within 3 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness : 0.1mm, aperture opening ratio : 100% 4. warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended due to potential changes in mating action and other variab les. please contact us if yo u use other cleaning agents. ) 6. noteworthy points please note that any mating operation of the connector when not mounted on the board may cause damage or deformation of the contacts. during hand soldering, do not apply flux, as it will flow over the connector. this housing color may have slight variations depending on the production lot. this color variation does not affect performance. please refer to l df52 mating and unmating procedure document (etad-h0788) z for points in handling regarding mating operations. please refer to l harness procedure manual (etad-h0791) z for points in harness operations. 10sec max 90-120sec time (sec) temperature ? yy max 250 ? 60sec max ? ? pre-heating time soldering time 6 df52 series 0.8mm pitch, compact and robust wire-to-board connectors the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 2016.5 features 1. small-sized connector 0.8mm pitch, 1.75mm height, 4.1mm depth. suitable for small-sized applications. 2. small but robust structure the housing is designed with thick walls while remaining small. this produces a strong, robust connector that resists damage. 3. suitable for high current applications. the maximum current of 2.5a (using 2-pos 28 awg wire) is achieved by using highly conductive material and appropriate contact force. 4. box shaped contact prevents deformation. the box shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. visual check insures fully mated plug and receptacle the housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. glow wire compliance (compliant with iec 60695-2-11) 7. halogen-free chlorine and bromine levels are below standard values of iec 61249-2-21. br : less than 900ppm, cl : less than 900ppm, br + cl : less than 1,500ppm. box shaped contact structure allows for visual inspection of the mating process. housing walls are thick while the connector remains small. robust structure prevents da mage while routing wiring. the box shaped structure of the crimp contact prevents deformation. the mated condition can be visually checked. board side incomplete mating cable side mating complete thick wall parts thick wall parts the contact is exposed in the half-mated state. mating is complete when the contact is no longer visible. exposed contact 0.8mm pitch, compact and robu st wire-to-board connectors df52 series small and robust structure fig.1 fig.2 fig.3 product specifications ratings current rating no. of contacts 2 3 to 5 6 to 10 12 or more operating temperature range : -40 to 85 ? (note 1) operating humidity range : 20 to 80 % (note 2) 28 awg 2.5a 2.0a 1.5a 1.2a 30 awg 2.0a 1.5a 1.2a 1.0a 32 awg 1.5a 1.0a 0.8a 0.8a voltage rating ac ? dc 100 + storage temperature range : -10 to 60 ? c (note 3) storage humidity range : 40 to 70% (note 3) items specifications conditions 1.insulation resistance 100m
min. measured at 100v dc 2. withstanding voltage no flashover dielectric breakdown 300v ac applied for 1 minute. 3.contact resistance 10 <
max. measured at a maximum of 20 v dc, 1ma (dc or 1000hz) 4. vibration resistance no electrical discontinuity for more than 1 s 10 cycles in each of three axis at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1 s acceleration of 490 m/s 2 ,11 ms, 3 directions (semi- sinusoidal), 3 cycles each 6. moisture resistance contact resistance : 20m
max. insulation resistance : 100m
min. temperature : 402 ? ; humidity : 90 to 95%, for 96 hours 7. temperature cycle contact resistance : 20m
max. insulation resistance : 100m
min. (-55 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes 85 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes) in 5 cycles 8. mating durability contact resistance : 20m
max. mating and unmating : 20 times 9. solder heat resistance no dissolution of housing parts that affect performance. reflow : according to the recommended temperature profile manual soldering : temperature of soldering iron at 350 ? 10 ? for 3 seconds note 1 : includes the temperature rise caused by current flow. note 2 : use in environments without condensation. note 3 : the term ?torage?refers to the long-term storage condition of unused products before pcb mounting. operating temperature/humidity range is applied to the deenergized state after mounting of pcb and the temporary storage state during transportation. materials / finish product part materials finish ul regulation receptacle insulator polyamide black ul94v-0 contact copper alloy tin plating crimping plug insulator polyamide black ul94v-0 crimp contact contact copper alloy tin plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. receptacle df 52 - * s - 0.8 h ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type s : receptacle b contact pitch : 0.8mm c termination style : smt right angle type crimp contact df 52 - 2832 pcf ^ _ ` a ^ series name %' _ series no. ` applicable wire size up"8( a method type/packaging type 1$' 1mvhdsjnqdpoubdu sffm plug connector df 52 - * p - 0.8 c ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type p : crimping plug b contact pitch : 0.8mm c termination style $ : crimping plug 2 df52 series 0.8mm pitch, compact and robust wire-to-board connectors unreeling direction unreeling direction 80.1 40.1 20.1 b0.1 1.750.1 c +0.2 0 (a) b0.1 1.750.1 (a) (0.3) (2.25) (0.3) (2.25) ?1.5 +0.1 0 80.1 40.1 20.1 ?1.5 +0.1 0 upqpt 4uzmfpgsffm qpt b recommended pcb layout b packaging speci cation a contact no.1 mark b c p=0.8 2.77 1.75 t=0.2 t=0.15 0.50.03 0.90.05 0.80.05 b0.05 3.220.05 10.05 1.60.05 (0.3) p=0.80.05 6ojunn part no. hrs no. no. of contacts abc df52-2s-0.8h(21) 668-0004-5 21 2 3.8 0.8 3.2 df52-3s-0.8h(21) 668-0022-7 21 3 4.6 1.6 4.0 df52-4s-0.8h(21) 668-0005-8 21 4 5.4 2.4 4.8 df52-5s-0.8h(21) 668-0023-0 21 5 6.2 3.2 5.6 df52-6s-0.8h(21) 668-0006-0 21 6 7.0 4.0 6.4 df52-8s-0.8h(21) 668-0007-3 21 8 8.6 5.6 8.0 df52-10s-0.8h(21) 668-0008-6 21 10 10.2 7.2 9.6 df52-12s-0.8h(21) 668-0009-9 21 12 11.8 8.8 11.2 df52-14s-0.8h(21) 668-0024-2 21 14 13.4 10.4 12.8 df52-15s-0.8h(21) 668-0010-8 21 15 14.2 11.2 13.6 df52-16s-0.8h(21) 668-0025-5 21 16 15.0 12.0 14.4 df52-17s-0.8h(21) 668-0001-7 21 17 15.8 12.8 15.2 df52-20s-0.8h(21) 668-0011-0 21 20 18.2 15.2 17.6 note : please place orders for embossed packaged products in multiples 5,000 (5,000 pcs/reel). unreeling direction ?210.8 20.5 ?130.2 ?1.5 to the depth of the perforation product label %."9 & ?3802 ?801 r1 6ojunn part no. no. of contacts abcde df52-2s-0.8h(21) 2 16.0 7.5 22.4 16.4 df52-3s-0.8h(21) 3 df52-4s-0.8h(21) 4 df52-5s-0.8h(21) 5 df52-6s-0.8h(21) 6 df52-8s-0.8h(21) 8 24.0 11.5 30.4 24.4 df52-10s-0.8h(21) 10 df52-12s-0.8h(21) 12 df52-14s-0.8h(21) 14 df52-15s-0.8h(21) 15 df52-16s-0.8h(21) 16 df52-17s-0.8h(21) 17 df52-20s-0.8h(21) 20 32.0 14.2 28.4 38.4 32.4 3 df52 series 0.8mm pitch, compact and robust wire-to-board connectors [specification number] (21) : tin plating, embossed packaging right angle receptacle 4 df52 series 0.8mm pitch, compact and robust wire-to-board connectors crimping plug crimp contact contact no.1 mark one mark for every 5 pins 3.2 a 1 1.65 b p=0.8 1.4 2.68 1.35 0.65 0.3 3 3.8 (6.18) 0.6 0.66 p=4 t=0.12 6ojunn part no. hrs no. no. of contacts ab df52-2p-0.8c 668-0013-6 00 2 0.8 3.5 df52-3p-0.8c 668-0026-8 00 3 1.6 4.3 df52-4p-0.8c 668-0014-9 00 4 2.4 5.1 df52-5p-0.8c 668-0027-0 00 5 3.2 5.9 df52-6p-0.8c 668-0015-1 00 6 4.0 6.7 df52-8p-0.8c 668-0016-4 00 8 5.6 8.3 df52-10p-0.8c 668-0017-7 00 10 7.2 9.9 df52-12p-0.8c 668-0018-0 00 12 8.8 11.5 df52-14p-0.8c 668-0028-3 00 14 10.4 13.1 df52-15p-0.8c 668-0019-2 00 15 11.2 13.9 df52-16p-0.8c 668-0029-6 00 16 12.0 14.7 df52-17p-0.8c 668-0002-0 00 17 12.8 15.5 df52-20p-0.8c 668-0020-1 00 20 15.2 17.9 note : please specify the number of packs (100 pcs/pack) when placing orders. part no. hrs no. type quantity finish DF52-2832PCF 668-0030-5 00 reel contact 40,000 pcs/reel tin plating note 1 : this product is sold in 40,000 piecies per reels. please place orders in multiples of 40,000. ?"qqmjdbcmfxjsf 5joofe"oofbmfe$pqqfs8jsf
conductor size (core structure) jacket outer diameter recommended wire strip length 28 awg (7 pieces/0.127mm in diameter) 0.5 to 0.6mm ul1571 (thin line) 0.9 to 1.3mm 30 awg (7 pieces/0.102mm in diameter) 32 awg (7 pieces/0.08mm in diameter) note : please contact our sales representative. when using wires other than applicable wires. note : the strip length is a reference value. please adjust the strip length accordingly for specifications and requirements. refer to the crimping quality standard (atad-h0789) for details. [specification number] none : 40,000 pcs/reel [specification number] none : 100 pcs/pack 5 df52 series 0.8mm pitch, compact and robust wire-to-board connectors b applicable crimping tools type part no. hrs no. applicable contact remarks applicator ap105-df52-2832p 901-4636-7 DF52-2832PCF dhs877900h-up DF52-2832PCF (note 2) manufactured by japan automatic machine co.,ltd. press body cm-105c 901-0001-0 00 pull-out tool df-c-po(a) 550-0170-8 00 DF52-2832PCF note 1 : issues caused by using other than our specified tools are not covered by warranty. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding defective crimping of adapting applicators manufactured by j.a.m. url http://www.jam-net.co.jp b precautions 1. recommended temperature profile (compatible with lead- free soldering) [applicable conditions] 1. peak temperature : 250 ? max. 2. heating area : 220 ? min. for less than 60 seconds 3. preheating area : 150 ? to 180 ? for 90 to 120 seconds 4. number of times : no more than 2 times * measurement is conducted at the contact lead part soldering results may change depending on conditions such as solder paste type, manufacturer, pcb size, and other soldering materials. please determine all mounting conditions before use. note 1 : this temperature profile is a recommended value. 2. recommended manual soldering conditions temperature of soldering iron : 350 ? 10 ? , soldering time : within 3 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness : 0.1mm, aperture opening ratio : 100% 4. warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended due to potential changes in mating action and other variab les. please contact us if yo u use other cleaning agents. ) 6. noteworthy points please note that any mating operation of the connector when not mounted on the board may cause damage or deformation of the contacts. during hand soldering, do not apply flux, as it will flow over the connector. this housing color may have slight variations depending on the production lot. this color variation does not affect performance. please refer to l df52 mating and unmating procedure document (etad-h0788) z for points in handling regarding mating operations. please refer to l harness procedure manual (etad-h0791) z for points in harness operations. 10sec max 90-120sec time (sec) temperature ? yy max 250 ? 60sec max ? ? pre-heating time soldering time 6 df52 series 0.8mm pitch, compact and robust wire-to-board connectors the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 2016.5 features 1. small-sized connector 0.8mm pitch, 1.75mm height, 4.1mm depth. suitable for small-sized applications. 2. small but robust structure the housing is designed with thick walls while remaining small. this produces a strong, robust connector that resists damage. 3. suitable for high current applications. the maximum current of 2.5a (using 2-pos 28 awg wire) is achieved by using highly conductive material and appropriate contact force. 4. box shaped contact prevents deformation. the box shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. visual check insures fully mated plug and receptacle the housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. glow wire compliance (compliant with iec 60695-2-11) 7. halogen-free chlorine and bromine levels are below standard values of iec 61249-2-21. br : less than 900ppm, cl : less than 900ppm, br + cl : less than 1,500ppm. box shaped contact structure allows for visual inspection of the mating process. housing walls are thick while the connector remains small. robust structure prevents da mage while routing wiring. the box shaped structure of the crimp contact prevents deformation. the mated condition can be visually checked. board side incomplete mating cable side mating complete thick wall parts thick wall parts the contact is exposed in the half-mated state. mating is complete when the contact is no longer visible. exposed contact 0.8mm pitch, compact and robu st wire-to-board connectors df52 series small and robust structure fig.1 fig.2 fig.3 product specifications ratings current rating no. of contacts 2 3 to 5 6 to 10 12 or more operating temperature range : -40 to 85 ? (note 1) operating humidity range : 20 to 80 % (note 2) 28 awg 2.5a 2.0a 1.5a 1.2a 30 awg 2.0a 1.5a 1.2a 1.0a 32 awg 1.5a 1.0a 0.8a 0.8a voltage rating ac ? dc 100 + storage temperature range : -10 to 60 ? c (note 3) storage humidity range : 40 to 70% (note 3) items specifications conditions 1.insulation resistance 100m
min. measured at 100v dc 2. withstanding voltage no flashover dielectric breakdown 300v ac applied for 1 minute. 3.contact resistance 10 <
max. measured at a maximum of 20 v dc, 1ma (dc or 1000hz) 4. vibration resistance no electrical discontinuity for more than 1 s 10 cycles in each of three axis at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1 s acceleration of 490 m/s 2 ,11 ms, 3 directions (semi- sinusoidal), 3 cycles each 6. moisture resistance contact resistance : 20m
max. insulation resistance : 100m
min. temperature : 402 ? ; humidity : 90 to 95%, for 96 hours 7. temperature cycle contact resistance : 20m
max. insulation resistance : 100m
min. (-55 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes 85 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes) in 5 cycles 8. mating durability contact resistance : 20m
max. mating and unmating : 20 times 9. solder heat resistance no dissolution of housing parts that affect performance. reflow : according to the recommended temperature profile manual soldering : temperature of soldering iron at 350 ? 10 ? for 3 seconds note 1 : includes the temperature rise caused by current flow. note 2 : use in environments without condensation. note 3 : the term ?torage?refers to the long-term storage condition of unused products before pcb mounting. operating temperature/humidity range is applied to the deenergized state after mounting of pcb and the temporary storage state during transportation. materials / finish product part materials finish ul regulation receptacle insulator polyamide black ul94v-0 contact copper alloy tin plating crimping plug insulator polyamide black ul94v-0 crimp contact contact copper alloy tin plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. receptacle df 52 - * s - 0.8 h ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type s : receptacle b contact pitch : 0.8mm c termination style : smt right angle type crimp contact df 52 - 2832 pcf ^ _ ` a ^ series name %' _ series no. ` applicable wire size up"8( a method type/packaging type 1$' 1mvhdsjnqdpoubdu sffm plug connector df 52 - * p - 0.8 c ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type p : crimping plug b contact pitch : 0.8mm c termination style $ : crimping plug 2 df52 series 0.8mm pitch, compact and robust wire-to-board connectors unreeling direction unreeling direction 80.1 40.1 20.1 b0.1 1.750.1 c +0.2 0 (a) b0.1 1.750.1 (a) (0.3) (2.25) (0.3) (2.25) ?1.5 +0.1 0 80.1 40.1 20.1 ?1.5 +0.1 0 upqpt 4uzmfpgsffm qpt b recommended pcb layout b packaging speci cation a contact no.1 mark b c p=0.8 2.77 1.75 t=0.2 t=0.15 0.50.03 0.90.05 0.80.05 b0.05 3.220.05 10.05 1.60.05 (0.3) p=0.80.05 6ojunn part no. hrs no. no. of contacts abc df52-2s-0.8h(21) 668-0004-5 21 2 3.8 0.8 3.2 df52-3s-0.8h(21) 668-0022-7 21 3 4.6 1.6 4.0 df52-4s-0.8h(21) 668-0005-8 21 4 5.4 2.4 4.8 df52-5s-0.8h(21) 668-0023-0 21 5 6.2 3.2 5.6 df52-6s-0.8h(21) 668-0006-0 21 6 7.0 4.0 6.4 df52-8s-0.8h(21) 668-0007-3 21 8 8.6 5.6 8.0 df52-10s-0.8h(21) 668-0008-6 21 10 10.2 7.2 9.6 df52-12s-0.8h(21) 668-0009-9 21 12 11.8 8.8 11.2 df52-14s-0.8h(21) 668-0024-2 21 14 13.4 10.4 12.8 df52-15s-0.8h(21) 668-0010-8 21 15 14.2 11.2 13.6 df52-16s-0.8h(21) 668-0025-5 21 16 15.0 12.0 14.4 df52-17s-0.8h(21) 668-0001-7 21 17 15.8 12.8 15.2 df52-20s-0.8h(21) 668-0011-0 21 20 18.2 15.2 17.6 note : please place orders for embossed packaged products in multiples 5,000 (5,000 pcs/reel). unreeling direction ?210.8 20.5 ?130.2 ?1.5 to the depth of the perforation product label %."9 & ?3802 ?801 r1 6ojunn part no. no. of contacts abcde df52-2s-0.8h(21) 2 16.0 7.5 22.4 16.4 df52-3s-0.8h(21) 3 df52-4s-0.8h(21) 4 df52-5s-0.8h(21) 5 df52-6s-0.8h(21) 6 df52-8s-0.8h(21) 8 24.0 11.5 30.4 24.4 df52-10s-0.8h(21) 10 df52-12s-0.8h(21) 12 df52-14s-0.8h(21) 14 df52-15s-0.8h(21) 15 df52-16s-0.8h(21) 16 df52-17s-0.8h(21) 17 df52-20s-0.8h(21) 20 32.0 14.2 28.4 38.4 32.4 3 df52 series 0.8mm pitch, compact and robust wire-to-board connectors [specification number] (21) : tin plating, embossed packaging right angle receptacle 4 df52 series 0.8mm pitch, compact and robust wire-to-board connectors crimping plug crimp contact contact no.1 mark one mark for every 5 pins 3.2 a 1 1.65 b p=0.8 1.4 2.68 1.35 0.65 0.3 3 3.8 (6.18) 0.6 0.66 p=4 t=0.12 6ojunn part no. hrs no. no. of contacts ab df52-2p-0.8c 668-0013-6 00 2 0.8 3.5 df52-3p-0.8c 668-0026-8 00 3 1.6 4.3 df52-4p-0.8c 668-0014-9 00 4 2.4 5.1 df52-5p-0.8c 668-0027-0 00 5 3.2 5.9 df52-6p-0.8c 668-0015-1 00 6 4.0 6.7 df52-8p-0.8c 668-0016-4 00 8 5.6 8.3 df52-10p-0.8c 668-0017-7 00 10 7.2 9.9 df52-12p-0.8c 668-0018-0 00 12 8.8 11.5 df52-14p-0.8c 668-0028-3 00 14 10.4 13.1 df52-15p-0.8c 668-0019-2 00 15 11.2 13.9 df52-16p-0.8c 668-0029-6 00 16 12.0 14.7 df52-17p-0.8c 668-0002-0 00 17 12.8 15.5 df52-20p-0.8c 668-0020-1 00 20 15.2 17.9 note : please specify the number of packs (100 pcs/pack) when placing orders. part no. hrs no. type quantity finish DF52-2832PCF 668-0030-5 00 reel contact 40,000 pcs/reel tin plating note 1 : this product is sold in 40,000 piecies per reels. please place orders in multiples of 40,000. ?"qqmjdbcmfxjsf 5joofe"oofbmfe$pqqfs8jsf
conductor size (core structure) jacket outer diameter recommended wire strip length 28 awg (7 pieces/0.127mm in diameter) 0.5 to 0.6mm ul1571 (thin line) 0.9 to 1.3mm 30 awg (7 pieces/0.102mm in diameter) 32 awg (7 pieces/0.08mm in diameter) note : please contact our sales representative. when using wires other than applicable wires. note : the strip length is a reference value. please adjust the strip length accordingly for specifications and requirements. refer to the crimping quality standard (atad-h0789) for details. [specification number] none : 40,000 pcs/reel [specification number] none : 100 pcs/pack 5 df52 series 0.8mm pitch, compact and robust wire-to-board connectors b applicable crimping tools type part no. hrs no. applicable contact remarks applicator ap105-df52-2832p 901-4636-7 DF52-2832PCF dhs877900h-up DF52-2832PCF (note 2) manufactured by japan automatic machine co.,ltd. press body cm-105c 901-0001-0 00 pull-out tool df-c-po(a) 550-0170-8 00 DF52-2832PCF note 1 : issues caused by using other than our specified tools are not covered by warranty. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding defective crimping of adapting applicators manufactured by j.a.m. url http://www.jam-net.co.jp b precautions 1. recommended temperature profile (compatible with lead- free soldering) [applicable conditions] 1. peak temperature : 250 ? max. 2. heating area : 220 ? min. for less than 60 seconds 3. preheating area : 150 ? to 180 ? for 90 to 120 seconds 4. number of times : no more than 2 times * measurement is conducted at the contact lead part soldering results may change depending on conditions such as solder paste type, manufacturer, pcb size, and other soldering materials. please determine all mounting conditions before use. note 1 : this temperature profile is a recommended value. 2. recommended manual soldering conditions temperature of soldering iron : 350 ? 10 ? , soldering time : within 3 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness : 0.1mm, aperture opening ratio : 100% 4. warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended due to potential changes in mating action and other variab les. please contact us if yo u use other cleaning agents. ) 6. noteworthy points please note that any mating operation of the connector when not mounted on the board may cause damage or deformation of the contacts. during hand soldering, do not apply flux, as it will flow over the connector. this housing color may have slight variations depending on the production lot. this color variation does not affect performance. please refer to l df52 mating and unmating procedure document (etad-h0788) z for points in handling regarding mating operations. please refer to l harness procedure manual (etad-h0791) z for points in harness operations. 10sec max 90-120sec time (sec) temperature ? yy max 250 ? 60sec max ? ? pre-heating time soldering time 6 df52 series 0.8mm pitch, compact and robust wire-to-board connectors the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. 2016.5 features 1. small-sized connector 0.8mm pitch, 1.75mm height, 4.1mm depth. suitable for small-sized applications. 2. small but robust structure the housing is designed with thick walls while remaining small. this produces a strong, robust connector that resists damage. 3. suitable for high current applications. the maximum current of 2.5a (using 2-pos 28 awg wire) is achieved by using highly conductive material and appropriate contact force. 4. box shaped contact prevents deformation. the box shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. visual check insures fully mated plug and receptacle the housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. glow wire compliance (compliant with iec 60695-2-11) 7. halogen-free chlorine and bromine levels are below standard values of iec 61249-2-21. br : less than 900ppm, cl : less than 900ppm, br + cl : less than 1,500ppm. box shaped contact structure allows for visual inspection of the mating process. housing walls are thick while the connector remains small. robust structure prevents da mage while routing wiring. the box shaped structure of the crimp contact prevents deformation. the mated condition can be visually checked. board side incomplete mating cable side mating complete thick wall parts thick wall parts the contact is exposed in the half-mated state. mating is complete when the contact is no longer visible. exposed contact 0.8mm pitch, compact and robu st wire-to-board connectors df52 series small and robust structure fig.1 fig.2 fig.3 product specifications ratings current rating no. of contacts 2 3 to 5 6 to 10 12 or more operating temperature range : -40 to 85 ? (note 1) operating humidity range : 20 to 80 % (note 2) 28 awg 2.5a 2.0a 1.5a 1.2a 30 awg 2.0a 1.5a 1.2a 1.0a 32 awg 1.5a 1.0a 0.8a 0.8a voltage rating ac ? dc 100 + storage temperature range : -10 to 60 ? c (note 3) storage humidity range : 40 to 70% (note 3) items specifications conditions 1.insulation resistance 100m
min. measured at 100v dc 2. withstanding voltage no flashover dielectric breakdown 300v ac applied for 1 minute. 3.contact resistance 10 <
max. measured at a maximum of 20 v dc, 1ma (dc or 1000hz) 4. vibration resistance no electrical discontinuity for more than 1 s 10 cycles in each of three axis at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1 s acceleration of 490 m/s 2 ,11 ms, 3 directions (semi- sinusoidal), 3 cycles each 6. moisture resistance contact resistance : 20m
max. insulation resistance : 100m
min. temperature : 402 ? ; humidity : 90 to 95%, for 96 hours 7. temperature cycle contact resistance : 20m
max. insulation resistance : 100m
min. (-55 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes 85 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes) in 5 cycles 8. mating durability contact resistance : 20m
max. mating and unmating : 20 times 9. solder heat resistance no dissolution of housing parts that affect performance. reflow : according to the recommended temperature profile manual soldering : temperature of soldering iron at 350 ? 10 ? for 3 seconds note 1 : includes the temperature rise caused by current flow. note 2 : use in environments without condensation. note 3 : the term ?torage?refers to the long-term storage condition of unused products before pcb mounting. operating temperature/humidity range is applied to the deenergized state after mounting of pcb and the temporary storage state during transportation. materials / finish product part materials finish ul regulation receptacle insulator polyamide black ul94v-0 contact copper alloy tin plating crimping plug insulator polyamide black ul94v-0 crimp contact contact copper alloy tin plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. receptacle df 52 - * s - 0.8 h ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type s : receptacle b contact pitch : 0.8mm c termination style : smt right angle type crimp contact df 52 - 2832 pcf ^ _ ` a ^ series name %' _ series no. ` applicable wire size up"8( a method type/packaging type 1$' 1mvhdsjnqdpoubdu sffm plug connector df 52 - * p - 0.8 c ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type p : crimping plug b contact pitch : 0.8mm c termination style $ : crimping plug 2 df52 series 0.8mm pitch, compact and robust wire-to-board connectors unreeling direction unreeling direction 80.1 40.1 20.1 b0.1 1.750.1 c +0.2 0 (a) b0.1 1.750.1 (a) (0.3) (2.25) (0.3) (2.25) ?1.5 +0.1 0 80.1 40.1 20.1 ?1.5 +0.1 0 upqpt 4uzmfpgsffm qpt b recommended pcb layout b packaging speci cation a contact no.1 mark b c p=0.8 2.77 1.75 t=0.2 t=0.15 0.50.03 0.90.05 0.80.05 b0.05 3.220.05 10.05 1.60.05 (0.3) p=0.80.05 6ojunn part no. hrs no. no. of contacts abc df52-2s-0.8h(21) 668-0004-5 21 2 3.8 0.8 3.2 df52-3s-0.8h(21) 668-0022-7 21 3 4.6 1.6 4.0 df52-4s-0.8h(21) 668-0005-8 21 4 5.4 2.4 4.8 df52-5s-0.8h(21) 668-0023-0 21 5 6.2 3.2 5.6 df52-6s-0.8h(21) 668-0006-0 21 6 7.0 4.0 6.4 df52-8s-0.8h(21) 668-0007-3 21 8 8.6 5.6 8.0 df52-10s-0.8h(21) 668-0008-6 21 10 10.2 7.2 9.6 df52-12s-0.8h(21) 668-0009-9 21 12 11.8 8.8 11.2 df52-14s-0.8h(21) 668-0024-2 21 14 13.4 10.4 12.8 df52-15s-0.8h(21) 668-0010-8 21 15 14.2 11.2 13.6 df52-16s-0.8h(21) 668-0025-5 21 16 15.0 12.0 14.4 df52-17s-0.8h(21) 668-0001-7 21 17 15.8 12.8 15.2 df52-20s-0.8h(21) 668-0011-0 21 20 18.2 15.2 17.6 note : please place orders for embossed packaged products in multiples 5,000 (5,000 pcs/reel). unreeling direction ?210.8 20.5 ?130.2 ?1.5 to the depth of the perforation product label %."9 & ?3802 ?801 r1 6ojunn part no. no. of contacts abcde df52-2s-0.8h(21) 2 16.0 7.5 22.4 16.4 df52-3s-0.8h(21) 3 df52-4s-0.8h(21) 4 df52-5s-0.8h(21) 5 df52-6s-0.8h(21) 6 df52-8s-0.8h(21) 8 24.0 11.5 30.4 24.4 df52-10s-0.8h(21) 10 df52-12s-0.8h(21) 12 df52-14s-0.8h(21) 14 df52-15s-0.8h(21) 15 df52-16s-0.8h(21) 16 df52-17s-0.8h(21) 17 df52-20s-0.8h(21) 20 32.0 14.2 28.4 38.4 32.4 3 df52 series 0.8mm pitch, compact and robust wire-to-board connectors [specification number] (21) : tin plating, embossed packaging right angle receptacle 4 df52 series 0.8mm pitch, compact and robust wire-to-board connectors crimping plug crimp contact contact no.1 mark one mark for every 5 pins 3.2 a 1 1.65 b p=0.8 1.4 2.68 1.35 0.65 0.3 3 3.8 (6.18) 0.6 0.66 p=4 t=0.12 6ojunn part no. hrs no. no. of contacts ab df52-2p-0.8c 668-0013-6 00 2 0.8 3.5 df52-3p-0.8c 668-0026-8 00 3 1.6 4.3 df52-4p-0.8c 668-0014-9 00 4 2.4 5.1 df52-5p-0.8c 668-0027-0 00 5 3.2 5.9 df52-6p-0.8c 668-0015-1 00 6 4.0 6.7 df52-8p-0.8c 668-0016-4 00 8 5.6 8.3 df52-10p-0.8c 668-0017-7 00 10 7.2 9.9 df52-12p-0.8c 668-0018-0 00 12 8.8 11.5 df52-14p-0.8c 668-0028-3 00 14 10.4 13.1 df52-15p-0.8c 668-0019-2 00 15 11.2 13.9 df52-16p-0.8c 668-0029-6 00 16 12.0 14.7 df52-17p-0.8c 668-0002-0 00 17 12.8 15.5 df52-20p-0.8c 668-0020-1 00 20 15.2 17.9 note : please specify the number of packs (100 pcs/pack) when placing orders. part no. hrs no. type quantity finish DF52-2832PCF 668-0030-5 00 reel contact 40,000 pcs/reel tin plating note 1 : this product is sold in 40,000 piecies per reels. please place orders in multiples of 40,000. ?"qqmjdbcmfxjsf 5joofe"oofbmfe$pqqfs8jsf
conductor size (core structure) jacket outer diameter recommended wire strip length 28 awg (7 pieces/0.127mm in diameter) 0.5 to 0.6mm ul1571 (thin line) 0.9 to 1.3mm 30 awg (7 pieces/0.102mm in diameter) 32 awg (7 pieces/0.08mm in diameter) note : please contact our sales representative. when using wires other than applicable wires. note : the strip length is a reference value. please adjust the strip length accordingly for specifications and requirements. refer to the crimping quality standard (atad-h0789) for details. [specification number] none : 40,000 pcs/reel [specification number] none : 100 pcs/pack 5 df52 series 0.8mm pitch, compact and robust wire-to-board connectors b applicable crimping tools type part no. hrs no. applicable contact remarks applicator ap105-df52-2832p 901-4636-7 DF52-2832PCF dhs877900h-up DF52-2832PCF (note 2) manufactured by japan automatic machine co.,ltd. press body cm-105c 901-0001-0 00 pull-out tool df-c-po(a) 550-0170-8 00 DF52-2832PCF note 1 : issues caused by using other than our specified tools are not covered by warranty. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding defective crimping of adapting applicators manufactured by j.a.m. url http://www.jam-net.co.jp b precautions 1. recommended temperature profile (compatible with lead- free soldering) [applicable conditions] 1. peak temperature : 250 ? max. 2. heating area : 220 ? min. for less than 60 seconds 3. preheating area : 150 ? to 180 ? for 90 to 120 seconds 4. number of times : no more than 2 times * measurement is conducted at the contact lead part soldering results may change depending on conditions such as solder paste type, manufacturer, pcb size, and other soldering materials. please determine all mounting conditions before use. note 1 : this temperature profile is a recommended value. 2. recommended manual soldering conditions temperature of soldering iron : 350 ? 10 ? , soldering time : within 3 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness : 0.1mm, aperture opening ratio : 100% 4. warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended due to potential changes in mating action and other variab les. please contact us if yo u use other cleaning agents. ) 6. noteworthy points please note that any mating operation of the connector when not mounted on the board may cause damage or deformation of the contacts. during hand soldering, do not apply flux, as it will flow over the connector. this housing color may have slight variations depending on the production lot. this color variation does not affect performance. please refer to l df52 mating and unmating procedure document (etad-h0788) z for points in handling regarding mating operations. please refer to l harness procedure manual (etad-h0791) z for points in harness operations. 10sec max 90-120sec time (sec) temperature ? yy max 250 ? 60sec max ? ? pre-heating time soldering time 6 df52 series 0.8mm pitch, compact and robust wire-to-board connectors the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/
jan.1.2017 copyright 2017 hirose electric co., ltd. all rights reserved. powered by tcpdf (www.tcpdf.org) 2016.5 features 1. small-sized connector 0.8mm pitch, 1.75mm height, 4.1mm depth. suitable for small-sized applications. 2. small but robust structure the housing is designed with thick walls while remaining small. this produces a strong, robust connector that resists damage. 3. suitable for high current applications. the maximum current of 2.5a (using 2-pos 28 awg wire) is achieved by using highly conductive material and appropriate contact force. 4. box shaped contact prevents deformation. the box shaped crimp contact prevents deformation during assembly and contributes to the overall stability and robustness. 5. visual check insures fully mated plug and receptacle the housing is designed with an open side that allows for visual inspection to insure the connectors are fully mated preventing accidental disconnect. 6. glow wire compliance (compliant with iec 60695-2-11) 7. halogen-free chlorine and bromine levels are below standard values of iec 61249-2-21. br : less than 900ppm, cl : less than 900ppm, br + cl : less than 1,500ppm. box shaped contact structure allows for visual inspection of the mating process. housing walls are thick while the connector remains small. robust structure prevents da mage while routing wiring. the box shaped structure of the crimp contact prevents deformation. the mated condition can be visually checked. board side incomplete mating cable side mating complete thick wall parts thick wall parts the contact is exposed in the half-mated state. mating is complete when the contact is no longer visible. exposed contact 0.8mm pitch, compact and robu st wire-to-board connectors df52 series small and robust structure fig.1 fig.2 fig.3 product specifications ratings current rating no. of contacts 2 3 to 5 6 to 10 12 or more operating temperature range : -40 to 85 ? (note 1) operating humidity range : 20 to 80 % (note 2) 28 awg 2.5a 2.0a 1.5a 1.2a 30 awg 2.0a 1.5a 1.2a 1.0a 32 awg 1.5a 1.0a 0.8a 0.8a voltage rating ac ? dc 100 + storage temperature range : -10 to 60 ? c (note 3) storage humidity range : 40 to 70% (note 3) items specifications conditions 1.insulation resistance 100m
min. measured at 100v dc 2. withstanding voltage no flashover dielectric breakdown 300v ac applied for 1 minute. 3.contact resistance 10 <
max. measured at a maximum of 20 v dc, 1ma (dc or 1000hz) 4. vibration resistance no electrical discontinuity for more than 1 s 10 cycles in each of three axis at frequency 10-55 hz, half amplitude 0.75mm 5. shock resistance no electrical discontinuity for more than 1 s acceleration of 490 m/s 2 ,11 ms, 3 directions (semi- sinusoidal), 3 cycles each 6. moisture resistance contact resistance : 20m
max. insulation resistance : 100m
min. temperature : 402 ? ; humidity : 90 to 95%, for 96 hours 7. temperature cycle contact resistance : 20m
max. insulation resistance : 100m
min. (-55 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes 85 ? for 30 minutes 5 to 35 ? for 2 to 3 minutes) in 5 cycles 8. mating durability contact resistance : 20m
max. mating and unmating : 20 times 9. solder heat resistance no dissolution of housing parts that affect performance. reflow : according to the recommended temperature profile manual soldering : temperature of soldering iron at 350 ? 10 ? for 3 seconds note 1 : includes the temperature rise caused by current flow. note 2 : use in environments without condensation. note 3 : the term ?torage?refers to the long-term storage condition of unused products before pcb mounting. operating temperature/humidity range is applied to the deenergized state after mounting of pcb and the temporary storage state during transportation. materials / finish product part materials finish ul regulation receptacle insulator polyamide black ul94v-0 contact copper alloy tin plating crimping plug insulator polyamide black ul94v-0 crimp contact contact copper alloy tin plating product number structure refer to the chart below when determining the product specifications from the product number. please select from the product numbers listed in this catalog when placing orders. receptacle df 52 - * s - 0.8 h ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type s : receptacle b contact pitch : 0.8mm c termination style : smt right angle type crimp contact df 52 - 2832 pcf ^ _ ` a ^ series name %' _ series no. ` applicable wire size up"8( a method type/packaging type 1$' 1mvhdsjnqdpoubdu sffm plug connector df 52 - * p - 0.8 c ^ _ ` a b c ^ series name : df _ series no. : 52 ` number of contacts : 2 3 4 5 6 8 10 12 14 15 16 17 20 a connector type p : crimping plug b contact pitch : 0.8mm c termination style $ : crimping plug 2 df52 series 0.8mm pitch, compact and robust wire-to-board connectors unreeling direction unreeling direction 80.1 40.1 20.1 b0.1 1.750.1 c +0.2 0 (a) b0.1 1.750.1 (a) (0.3) (2.25) (0.3) (2.25) ?1.5 +0.1 0 80.1 40.1 20.1 ?1.5 +0.1 0 upqpt 4uzmfpgsffm qpt b recommended pcb layout b packaging speci cation a contact no.1 mark b c p=0.8 2.77 1.75 t=0.2 t=0.15 0.50.03 0.90.05 0.80.05 b0.05 3.220.05 10.05 1.60.05 (0.3) p=0.80.05 6ojunn part no. hrs no. no. of contacts abc df52-2s-0.8h(21) 668-0004-5 21 2 3.8 0.8 3.2 df52-3s-0.8h(21) 668-0022-7 21 3 4.6 1.6 4.0 df52-4s-0.8h(21) 668-0005-8 21 4 5.4 2.4 4.8 df52-5s-0.8h(21) 668-0023-0 21 5 6.2 3.2 5.6 df52-6s-0.8h(21) 668-0006-0 21 6 7.0 4.0 6.4 df52-8s-0.8h(21) 668-0007-3 21 8 8.6 5.6 8.0 df52-10s-0.8h(21) 668-0008-6 21 10 10.2 7.2 9.6 df52-12s-0.8h(21) 668-0009-9 21 12 11.8 8.8 11.2 df52-14s-0.8h(21) 668-0024-2 21 14 13.4 10.4 12.8 df52-15s-0.8h(21) 668-0010-8 21 15 14.2 11.2 13.6 df52-16s-0.8h(21) 668-0025-5 21 16 15.0 12.0 14.4 df52-17s-0.8h(21) 668-0001-7 21 17 15.8 12.8 15.2 df52-20s-0.8h(21) 668-0011-0 21 20 18.2 15.2 17.6 note : please place orders for embossed packaged products in multiples 5,000 (5,000 pcs/reel). unreeling direction ?210.8 20.5 ?130.2 ?1.5 to the depth of the perforation product label %."9 & ?3802 ?801 r1 6ojunn part no. no. of contacts abcde df52-2s-0.8h(21) 2 16.0 7.5 22.4 16.4 df52-3s-0.8h(21) 3 df52-4s-0.8h(21) 4 df52-5s-0.8h(21) 5 df52-6s-0.8h(21) 6 df52-8s-0.8h(21) 8 24.0 11.5 30.4 24.4 df52-10s-0.8h(21) 10 df52-12s-0.8h(21) 12 df52-14s-0.8h(21) 14 df52-15s-0.8h(21) 15 df52-16s-0.8h(21) 16 df52-17s-0.8h(21) 17 df52-20s-0.8h(21) 20 32.0 14.2 28.4 38.4 32.4 3 df52 series 0.8mm pitch, compact and robust wire-to-board connectors [specification number] (21) : tin plating, embossed packaging right angle receptacle 4 df52 series 0.8mm pitch, compact and robust wire-to-board connectors crimping plug crimp contact contact no.1 mark one mark for every 5 pins 3.2 a 1 1.65 b p=0.8 1.4 2.68 1.35 0.65 0.3 3 3.8 (6.18) 0.6 0.66 p=4 t=0.12 6ojunn part no. hrs no. no. of contacts ab df52-2p-0.8c 668-0013-6 00 2 0.8 3.5 df52-3p-0.8c 668-0026-8 00 3 1.6 4.3 df52-4p-0.8c 668-0014-9 00 4 2.4 5.1 df52-5p-0.8c 668-0027-0 00 5 3.2 5.9 df52-6p-0.8c 668-0015-1 00 6 4.0 6.7 df52-8p-0.8c 668-0016-4 00 8 5.6 8.3 df52-10p-0.8c 668-0017-7 00 10 7.2 9.9 df52-12p-0.8c 668-0018-0 00 12 8.8 11.5 df52-14p-0.8c 668-0028-3 00 14 10.4 13.1 df52-15p-0.8c 668-0019-2 00 15 11.2 13.9 df52-16p-0.8c 668-0029-6 00 16 12.0 14.7 df52-17p-0.8c 668-0002-0 00 17 12.8 15.5 df52-20p-0.8c 668-0020-1 00 20 15.2 17.9 note : please specify the number of packs (100 pcs/pack) when placing orders. part no. hrs no. type quantity finish DF52-2832PCF 668-0030-5 00 reel contact 40,000 pcs/reel tin plating note 1 : this product is sold in 40,000 piecies per reels. please place orders in multiples of 40,000. ?"qqmjdbcmfxjsf 5joofe"oofbmfe$pqqfs8jsf
conductor size (core structure) jacket outer diameter recommended wire strip length 28 awg (7 pieces/0.127mm in diameter) 0.5 to 0.6mm ul1571 (thin line) 0.9 to 1.3mm 30 awg (7 pieces/0.102mm in diameter) 32 awg (7 pieces/0.08mm in diameter) note : please contact our sales representative. when using wires other than applicable wires. note : the strip length is a reference value. please adjust the strip length accordingly for specifications and requirements. refer to the crimping quality standard (atad-h0789) for details. [specification number] none : 40,000 pcs/reel [specification number] none : 100 pcs/pack 5 df52 series 0.8mm pitch, compact and robust wire-to-board connectors b applicable crimping tools type part no. hrs no. applicable contact remarks applicator ap105-df52-2832p 901-4636-7 DF52-2832PCF dhs877900h-up DF52-2832PCF (note 2) manufactured by japan automatic machine co.,ltd. press body cm-105c 901-0001-0 00 pull-out tool df-c-po(a) 550-0170-8 00 DF52-2832PCF note 1 : issues caused by using other than our specified tools are not covered by warranty. note 2 : please contact japan automatic machine co., ltd. (hereinafter j.a.m.) through their website regarding defective crimping of adapting applicators manufactured by j.a.m. url http://www.jam-net.co.jp b precautions 1. recommended temperature profile (compatible with lead- free soldering) [applicable conditions] 1. peak temperature : 250 ? max. 2. heating area : 220 ? min. for less than 60 seconds 3. preheating area : 150 ? to 180 ? for 90 to 120 seconds 4. number of times : no more than 2 times * measurement is conducted at the contact lead part soldering results may change depending on conditions such as solder paste type, manufacturer, pcb size, and other soldering materials. please determine all mounting conditions before use. note 1 : this temperature profile is a recommended value. 2. recommended manual soldering conditions temperature of soldering iron : 350 ? 10 ? , soldering time : within 3 seconds 3. recommended screen thickness and aperture ratio (pattern surface ratio) thickness : 0.1mm, aperture opening ratio : 100% 4. warpage of the board a maximum of 0.02mm at the center of connector, as measured from either end of the connector 5. cleaning conditions ipa cleaning is allowed. (cleaning is not recommended due to potential changes in mating action and other variab les. please contact us if yo u use other cleaning agents. ) 6. noteworthy points please note that any mating operation of the connector when not mounted on the board may cause damage or deformation of the contacts. during hand soldering, do not apply flux, as it will flow over the connector. this housing color may have slight variations depending on the production lot. this color variation does not affect performance. please refer to l df52 mating and unmating procedure document (etad-h0788) z for points in handling regarding mating operations. please refer to l harness procedure manual (etad-h0791) z for points in harness operations. 10sec max 90-120sec time (sec) temperature ? yy max 250 ? 60sec max ? ? pre-heating time soldering time 6 df52 series 0.8mm pitch, compact and robust wire-to-board connectors the characteristics and the specifications contained herein are for reference purpose. please refer to the latest customer dra wings prior to use. the contents of this catalog are current as of date of 05/2016. contents are subject to change without notice for the purpose o f improvements. 2-6-3,nakagawa chuoh,tsuzuki-ku,yokohama-shi 224-8540,japan tel: + 81-45-620-3526 fax: + 81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com ? usa: hirose electric (u.s.a.), inc. san jose office 2841 junction ave, suite 200 san jose, ca. 95134 phone : +1-408-253-9640 fax : +1-408-253-9641 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. detroit office (automotive) 17197 n. laurel park drive, suite 253, livonia, mi 48152 phone : +1-734-542-9963 fax : +1-734-542-9964 http://www.hirose.com/us/ usa: hirose electric (u.s.a.), inc. headquarters chicago office 2300 warrenville road, suite 150, downers grove, il 60515 phone : +1-630-282-6700 http://www.hirose.com/us/ china: hirose electric technologies (shenzhen) co., ltd. room 09-13, 19/f, office tower shun hing square, di wang commercial centre, 5002 shen nan dong road, shenzhen city, guangdong province, 518008 phone : +86-755-8207-0851 fax : +86-755-8207-0873 http://www.hirose.com/cn/ korea: hirose korea co.,ltd. 250, huimanggongwon-ro, siheung-si, gyeonggi-do, korea, 15083 phone : +82-31-496-7000 or 7124 fax : +82-31-496-7100 http://www.hirose.co.kr/ germany: hirose electric europe b.v. nuremberg office neumeyerstrasse 22-26, 90411 nurnberg phone : +49-911 32 68 89 63 fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ germany: hirose electric europe b.v. hanover office bayernstr. 3, haus c 30855 langenhagen, germany phone : +49-511 97 82 61 30 fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ germany: hirose electric europe b.v. german branch schoenbergstr. 20, 73760 ostfildern phone : +49-711-456002-1 fax : +49-711-456002-299 http://www.hirose.com/eu/ france: hirose electric europe b.v. paris office regus la garenne colombes,place de la belgique, 71 boulevard national la garenne colombes, 92250, france phone : +33 (0) 1 7082 3170 fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : +31-20-6557460 fax : +31-20-6557469 http://www.hirose.com/eu/ united kingdom: hirose electric europe bv (uk branch) 4 newton court, kelvin drive, knowlhill, milton keynes, mk5 8nh phone : +44-1908 202050 fax : +44-1908 202058 http://www.hirose.com/eu/ china: hirose electric (shanghai) co., ltd. 1601, henderson metropolitan, no.300, east nanjing road, huangpu district, shanghai, china 200001 phone : +86-21-6391-3355 fax : +86-21-6391-3335 http://www.hirose.com/cn/ china: hirose electric (shanghai) co.,ltd. beijing branch a1001, ocean international center, building 56# east 4th ring middle road, chaoyang district, beijing, 100025 phone : +86-10-5165-9332 fax : +86-10-5908-1381 http://www.hirose.com/cn/ taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : +886-2-2555-7377 fax : +886-2-2555-7350 http://www.hirose.com/tw/ hong kong: hirose electric hongkong trading co., ltd. room 1001, west wing, tsim sha tsui centre, 66 mody road, tsim sha tsui east, kowloon, hong kong phone : +852-2803-5338 fax : +852-2591-6560 http://www.hirose.com/hk/ india: hirose electric singapore pte. ltd. delhi liaison office office no.552, regus-green bo ulevard, level5, tower c, sec62, plot b-9a, block b, noida, 201301, uttar pradesh, india phone : +91-12-660-8018 fax : +91-120-4804949 http://www.hirose.com/sg/ singapore: hirose electric singapore pte. ltd. 10 anson road #26-16, international plaza 079903, singapore phone : +65-6324-6113 fax : + 65-6324-6123 http://www.hirose.com/sg/ india: hirose electric singapore pte. ltd. bangalore liaison office unit no-403, 4th floor, no-84, barton centre, mahatma gandhi (mg) road, bangalore 560 001, karnataka, india phone : +91-80-4120 1907 fax : +91-80-4120 9908 http://www.hirose.com/sg/ malaysia: penang representative office 1-21-01, suntech @ penang cybercity (1164), lintang mayang pasir 3,11950, bayan baru, penang, malaysia. phone : +604-619-2564 fax : +604-619-2574 http://www.hirose.com/sg/ thailand: bangkok office (representative office) unit 4703, 47th fl., 1 empire tower, south sathorn road, yannawa, sathorn, bangkok 10120 thailand phone : +66-2-686-1255 fax : +66-2-686-3433 http://www.hirose.com/sg/

▲Up To Search▲

Price & Availability of DF52-2832PCF

	To Download DF52-2832PCF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .